-
Interview questions mostly asked during technical round in Production :
A.
· Particle size of the drug substance
· Bulk density of drug substance/excipients
· Powder load in granulator
· Amount & concentration of binder
· Mixer speed & mixing timings
· Granulation moisture content
· Milling conditions
· Lubricant blending times
· Tablet hardness
· Coating solution spray rate
A.Both Matrixing & Bracketing’s can be applied in validation studies.
Matrixing
Different strength of same product
Different size of same equipment
Bracketting – Evaluating extremes
Largest and smallest fill volumes
Fastest and slowest operating speeds
A. Calibration is a demonstration that, a particular
Instrument or device produces results with in specified limits by comparisons with those produced by a reference or traceable standard over an appropriate range of measurements.
Laminating:- ‘Lamination’ is the separation of a tablet into two or more distinct horizontal layers.
Sticking/filming: ‘ Sticking’ refers to the tablet material adhering to the die wall. Filming is a slow form of sticking and is largely due to excess moisture in the granulation.
Cracking:- Small fine cracks observed on the upper and lower center surface of the tablets, or very rarely on the side wall are referred to as cracks.
Chipping:- ‘ Chipping’ is defined as the breaking of tablet edges, while the tablet leaves the press or during subsequent handling and coating operation.
Mottling:‘ Mottling’ is the term used to describe an unequal distribution of colour on a tablet.
Double Impression: ‘ Double impression’ involves only those punches,which have a monogram or other engraving on them.
8. Q What is the standard number of rotations used for friability test?
A. 100 rotations
9. Q What is the fall height of the tablets in the friabilator during friability testing?
A. 6 inches.Tablets falls from 6 inches height in each turn within the apparatus.
10. Q Which capsule is bigger in size – size ‘0’ or size ‘1’?
A. ‘0’ size
11. Define process flow of API m
anufacturing?
12. Define process flow of Tablet manufacturing?
13. Define process flow of Sterile Lyophilized manufacturing?
14. Define process flow of Biotech product manufacturing?
-
Interview question mostly ask during HR round:
2. What are your two best points?
3. What are your two weakest points?
4. What are three things you want to change about yourself?
5. How do you handle conflict?
6. Explain your leadership/research/volunteer experiences?
7. What extracurricular activities are you engaged in?
8. Where do you see yourself in five/ten years?
9. What do you do in your spare time?
10. What do you do to relieve stress?
11. What qualities do you have that you think are important for an effective leader to have?
Interview question mostly ask for fresher in B.pharm or M.pharm:
- Other related link
2. Interview Questions of Dr Reddys (Injectable Production)
3. http://www.uscgmp.com/2012/10/pharma-interview-questions.html
4. http://www.uscgmp.com/2013/09/interview-questions-for-technician.html
5. http://www.uscgmp.com/2013/08/interview-questions-for-quality.html
6. http://www.uscgmp.com/2013/05/interview-questions-for-production_28.html
7. http://www.uscgmp.com/2013/05/interview-questions-for-production.html
8. http://www.uscgmp.com/2014/03/interview-questions-for-pharmaceutical.html
9. http://www.uscgmp.com/2014/12/interview-questions-for-pharmaceutical.html
Good information. Thank you very much.
If you can provide us some example answers regarding HR questions as a pharmacy student applying to an industry, it will be more informative. Please do that for me.
Top HR Interview Question – “Tell Me About Yourself” Answered
Do you know why this question is asked so often in most job interviews? This question is actually an ice-breaker. Asking this question starts the conversion. So you should better be ready with an answer. This question gives the interviewer a chance to know about the interviewee. Once you start talking about yourself, interviewer starts preparing his/her next question. So there are high chances that the next question that would be fired on you will be based on the answer of this question. As the answer for this will be based on you, you think and prepare it before the interview.
While preparing for the answer consider including following points.
1. You:
Tell them your name and which place you are from. Suppose you are “Srinivs”, then do not start with “Myself Srinivas”; start with “I am Srinivas”. This is a very common mistake. Not acceptable in interviews especially in call center jobs.
You may talk about your family (cover up in short); you may talk about your how you came to the city, etc.
2. Your education:
Tell them about your education i.e. graduation/post-graduation. If you are a fresher then tell them the grades you got. If you have done something different than others then tell them. It surely adds a value!
3. Your experience:
Talk about your whole experience. Start from early years and gradually come to recent years. If you have a long experience then you must not be doing same thing all years. Then exactly what you were doing? This is what your interviewer wants to listen. If you are a fresher then talk about your projects.
4. Your experience regarding to the post you has applied for:
This is of most interest to your interviewer. You may be having lot of experience but how much experience you have regarding current job post is very important. If you do not have it then you can talk about some related experience. Or if you do not have related experience too then say it clearly. Buy along with it give them confidence that you can do it and you have genuine interest to do it.
Fresh candidates who do not have any kind of experience, you should show some positive attitude and exhibit willingness to learn and do new things. Be ready to do new things. Don't worry that you will make mistakes. Fresher candidates are expected to do mistakes and your employers are well aware of it so you don't have any reason to be afraid. Believe me no one will give you more work than you can handle.
5. Do not describe your salary or pay scale at this point of time (unless explicitly asked).
6. Avoid giving unnecessary details. Value your interviewer's time.
7. The idle answer should not last more than 1 minute.
All the best
thank you
what is the composition of CAT in QA
THANK YOU SIR..
Very useful information
Thank you very much
Very nice recommendation
thank u sir
THANK YOU
thank you sir
thank you for providing this matter
This comment has been removed by the author.
Thank you so much for writing in detail about interview questions for pharmaceutical industry. That post is written in depth and no doubt that's very helpful. top phone interview questions
This post is very useful for us. Because we have a lot of
tips and tricks from this post. Thank you for this amazing post share. I many
tips about jobs in bd as well. If you want to know more about a career sites, please visit our website.
http://www.bd-career.com
Very good post. its very beneficial to All. Need a latest Job opening updates. Visit Here http://www.universejobs.com
thanks for good information
Thnk you so much sir!
Thank you brother your given information helpful to us
Helpful..
Very helpful Post!!! This is the first time I have read a post like this. Find Career tips here– Visit Here
Very helpful Post!!! This is the first time I have read a post like this. Find Career tips here– Visit Here
Thank u for information
Thank u for information
thanks
good
Nice Share
is graduate from arts stream can do work in pharma sector asor g mr or any growth opportunity for him
valuable information, thanks a lot
Thank you sir
a very valuable and detailed post about the interviews questions. thanks for sharing. For more Job career tips visit us @ CelebrateJobs
Sir Ian pappu. I want to job of production in pharmacy. I have graduate degree with chemistry hon. Give some suggestions who to inter in this job
You actually make it seems really easy with your presentation, however, I find this matter to be actually something that I feel I might never understand. But credits to you, the way you've explained it. Thumbs up for you guys excellent work done by you.
10 Best Medical Marketing Media Strategies that Really Work – Optimized360.Com
Thank you for sharing an honest techniques. This journal contains terribly informative and quality contents that helps the scholars and others who ar in search of local government jobs . the step wise instruction can lead your sensible impression on headhunter.
I need help.Please share information for GMP Audit process,Role of GMP Auditor specially for Third Party audits.
This is best information to the pharma industry feild
Thank u sir
Good one dud