Step 1: Measure the length, width and height of the room using a good old fashioned tape measure 🙂 This will determine the size of the room or in other words its volume. Length x Width x Height = Step 2: Using a device called a ‘balometer’ measure the air supply coming out of the […]
A cleanroom or clean room is an environment, typically used in manufacturing or scientific research that has a low level of environmental pollutants such as dust, airborne microbes, aerosol particles and chemical vapors. More accurately, a clean-room has a controlledlevel of contamination that is specified by the number of particles per cubic meter at a […]
   Interview questions for Technician (engineer) in parenteral injectable plant     1.  Which test should to be perform for detect the leakage & penetration of steam in Steam sterilizer/ Autoclave? Answer: The identification for any leakage & penetration of steam can be tested by the following methods: Chamber Leak Test, Bowie Dick […]
CFR – Code of Federal Regulations Title 21
Interview Questions for Quality Assurance (QA- Validation) in pharmaceutical industry Final round of Interview questions in technical round (Sun Pharmaceutical Industries Ltd.) 1. What is the recommended bio burden limits of purified water & WFI? Purified water has a recommended bioburden limit of 100 CFU/mL, and Water for injection (WFI) has a recommended bio burden […]
Interview Questions for Production (Injectable preparation) in pharmaceutical industry Final round of Interview questions in technical round in Production (SPV) : 1. Principle of Autoclave operation. 2. Basics of cleaning validation during change over of different product in filling. 3. How to take swab from filling needle in filling machine ? 4. Handling of filters […]
Interview Questions for Production (Injectable preparation) in pharmaceutical industry (Cipla) Final round of Interview questions in technical round in Parenteral Production (SPV) : 1. Viable and non viable limits for classified area. 2. Acceptable Lux value as per guidelines for visual inspection of filled vials or ampoule. 3. Endotoxin, Bioburden, TOC Limits of WFI comparison […]
Manufacture of sterile pharmaceutical preparations, four grades of clean areas are distinguished as follows: Grade A: The local zone for high-risk operations, e.g. filling and making aseptic connections. Normally such conditions are achieved by using a unidirectional airflow workstation. Unidirectional air flow systems should provide a homogeneous air speed of 0.36–0.54 m/s (guidance value) at […]
ABSTRACT: In a pharmaceutical organization a quality control deals with testing, sampling, specification, and documentation, release procedure which ensure that all tests are actually carried out prior to release of material for sale or use. Four basic area of testing parenteral are Sterility, Freedom form Pyrogens, Freedom from particulate matter and leakers. The achievement of […]
