I. INTRODUCTION This article is written to guide and design how to set up validation procedure, one must recognize that for cleaning validation, as with validation of other processes, there may be more than one way to validate a process. In the end, the test of any validation process is whether scientific data shows that […]
The International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH) is a project that brings together the regulatory authorities of Europe, Japan and the United States and experts from the pharmaceutical industry in the three regions to discuss scientific and technical aspects of pharmaceutical product registration. The purpose of […]
Cleanroom Classification The current demands in today’s pharmaceutical industry for quality control and quality assurance have been driven by the aspiration to deliver consistently high quality and safe products to the consumer. The standards that are set to meet this goal are exorbitant and tightly controlled both internally and externally. Cleanroom environments are a crucial […]
Pharmaceutical companies and regulatory agencies work together to enhance patient safety when a medicine is first being studied (pre-approval) and after it becomes available to patients and their health care providers as a treatment option, following authorization by regulatory agencies (post-approval). Regulatory agencies are government or non-government authorities, responsible for oversight of the effectiveness, safety, […]
1.0 Overview A Standard Operating Procedure (SOP) is a set of written instructions that document a routine or repetitive activity followed by an organization. The development and use of SOPs are an integral part of a successful quality system as it provides individuals with the information to perform a job properly, and facilitates consistency in […]
Change control is defined as : “A formal system by which qualified representatives of appropriate disciplines review propose or actual changes that might affect a validated status. The intent is to determine the need for action that would ensure and document that the system is maintained in a validated state.” The implementation of a change […]
The F0 value of a saturated steam sterilisation process is the lethality expressed in terms of the equivalent time in minutes at a temperature of 121 °C delivered by the process to the product in its final container with reference to micro-organisms possessing a Z-value of 10. The total F0 of a process takes […]
The success of sterilization is dependent upon the performance reliability of the autoclave. Validation of effectiveness includes monitoring temperature, pressure and cycle duration time for each cycle and providing periodic sterilization/decontamination challenges (quality assurance), i.e. use of biological indicators. A logbook should be maintained to record autoclave use and be available for inspection. Temperature: This […]
Content may include the following descriptions (but not be limited to): 1. Introduction1.1 Project Description1.2 What a Validation Master Plan Is1.3 Scope of Validation Master Plan1.4 Definition for the Term Validation1.5 Validation Team Member1.6 Validation Team Responsibility 2. Concept of Qualification or Validation2.1 Fundamentals2.2 Concept of a Validation Life Cycle2.3 Elements of Validation2.4 Documentation Format […]
1. Definition of Validation Action of proving, in accordance with the principles of good manufacturing practice, that any procedure, process, equipment, material, activity, or system actually leads to the expected result Documented evidence which provides a high degree of assurance that a specific process will consistently produce a product meeting its predetermined specifications and quality […]
